Introduction to Thermal Vacuum Testing and Vacuum Science in the Aerospace Industry
January 19-20, 2021 | Online :: Central Time

 

Overview

Thermal vacuum testing is an essential component of spacecraft testing, helping to ensure launch survivability, improve satellite reliability, and establish a path to flight heritage. This course seeks to provide an in-depth understanding of the goals and requirements of thermal vacuum testing for satellites and satellite components, as well as establishing an educational foundation of the science and technology involved in conducting thermal vacuum testing. By making the underlying science approachable, this course will allow lab managers, engineers, technicians, and mission planners to better understand test requirements and determine the best methods to implement thermal vacuum testing.

The course will first provide an overview of typical satellite test requirements, and a comprehensive review of vacuum bake-out, thermal vacuum cycling, and thermal vacuum balance testing. This class will then provide a detailed framework of the vacuum science needed to understand thermal vacuum testing. Finally, a review of vacuum and analysis hardware will be presented with a goal of allowing course-takers to identify the test platform needed to achieve both specific program requirements and overall mission success.

Learning Outcomes

  • Give participants an overview of the fundamentals of thermal control testing, science, and design for satellites
  • Describe existing in industry methods of thermal control which are used for satellite thermal design
  • Discuss way of designing thermal control based on best industry practice
  • Hands-on experience in preliminary design and analysis of satellite thermal control system using one of the CubeSat missions
  • Identify tools for improved CubeSat thermal management
  • Discuss turnkey TCS solutions with affordable tools and componentry
  • Discuss budget, analytics, and mission lifecycle
  • Insights on applications in a large and small sat environment

Credits

LRA has been accredited as an Authorized Provider by the International Association for Continuing Education and Training (IACET).  In obtaining this accreditation, LRA has demonstrated that it  complies with the ANSI/IACET Standard which is recognized internationally as a standard of good practice. As a result of their Authorized Provider status, LRA is authorized to offer IACET CEUs for its programs that qualify under the ANSI/IACET Standard.

LRA is authorized by IACET to offer 0.6 CEUs for this event.

Requirements for Successful Completion of Program

Participants must sign in/out each day, be in attendance for the entirety of the course

Instructional Methods

Power Point presentations and open discussion will be used

Who Should Attend

  • Thermal scientists
  • Satellite engineers
  • TVAC technicians/operators
  • Anyone with a stake in optimized satellite design and thermal science, design, and involvement

Agenda

Tuesday, January 19, 2021 : Central Time

8:45 – 9:00 a.m. :: Log in: Sound Check

9:00 a.m. – 4:00 p.m. :: Course Timing

12:00 – 12:30 p.m. :: Break for Lunch


Introduction to Satellite Testing Requirements and Goals

  • Thermal Vacuum (TV) Test Goals
    • Verify Performance of S/C Components
    • Verify Performance of S/C Thermal System
    • Verify and Calibrate S/C Thermal Model
    • Verify and Calibrate Thermal Model of Components
    • GEO Vs LEO Vs Interplanetary
  • Purpose of a Thermal Model
    • Development
    • Aging
  • Use of the Thermal Model to Develop a Thermal Vacuum Test Protocol
    • Modification of the Model – Mounting Interface
    • Energy Sources and Sinks
    • Expose S/C to Conditions Close to Flight and Exceed It
    • Placement of Temperature Sensors
    • S/C Orientation in The Chamber – Heat Pipes, Propellant Tanks, Loop Heat Pipe
  • Type of The Test:
    • System
    • Survivability
    • Functional
    • Unit
    • And More
  • TV Chamber-In House for Cube Sats or Large–for GEO-Cadillac Vs Honda
  • TV Shock Chamber
  • TV Test Results:
    • Verification of S/C Performance
    • Verification of Thermal Model
  • Calibration of Temperature Channels: A/D and D/A Conversion

Introduction to Vacuum Science and Hardware

    • Overview of Vacuum Science and Modeling
      • Pumping Conductance
      • Surface Outgassing
      • Pumping of Heavy Gasses (Xe,Kr)
    • Overview of Vacuum Hardware
      • Generating Vacuum (Pumps)
      • Flanges/Fittings
      • Materials for Vacuum Use
    • Understanding Thermal Transfer in Vacuum
      • Common Thermal Control Surfaces
        • Thermal Platens
        • Passive Shrouds
        • Active Shrouds
        • Cold Fingers/Plates

Wednesday, January 20, 2021 : Central Time

8:45 – 9:00 a.m. :: Log in and Sound Check

9:00 a.m. – 11:30 a.m. :: Course Timing


Common Thermal Control Methods

      • QTH Heaters
      • Calrod Heaters
      • Epoxy Heaters
      • LN2
      • GN2/TCUs
      • Fluid Chillers
      • High and Low Emissivity Surface Treatments

Common Test Metrology and Instrumentation

      • Pressure Gauges
      • Thermocouples/RTDs
      • RGA
      • TQCM
      • Optical Witness Glass

Implementing Environmental Testing

      • Out-Sourced Testing Services
      • Establishing In-House Testing

Instructors

Dr. Joshua Gurian, President, Rydberg Vacuum Sciences

As a physicist with more than twenty years of high vacuum experience, Joshua Gurian has established himself as an expert in the design and construction of thermal vacuum test solutions. In 2018, Dr. Gurian founded Rydberg Vacuum Sciences, Inc., a space simulation systems manufacturer focused on providing high quality thermal vacuum environments tailored to the needs of the small satellite community.

Since earning his PhD in physics from the University of Virginia in 2010, Dr. Gurian has applied his scientific knowledge and expertise towards a wide variety of complex problems, from novel space simulation systems to advanced optical coatings for ground and space-based telescope systems. Prior to founding RVS, Dr. Gurian was the Senior Scientist at Dynavac, leading their Applications Lab to develop meaningful solutions to customers’ most pressing technical challenges.


Dr. Boris Yender, CEO & Principal Consultant, YSPMM LLC

Dr. Boris Yendler is expert in thermal terrestrial and space applications.  He has 30+ years of experience as a thermal engineer, developing methods for thermal management of different systems including spacecraft platforms. He is CEO and founder of YSPM, LLC, a consulting engineering company that provides engineering services to satellite operators and manufactures including propellant gauging, thermal and propulsion systems support, etc.

Currently, Dr. Yendler is working on several space missions including smallsat Lunar IceCube (Morehead university and NASA), landing BereSheet (Israel) spacecraft on Moon surface, GEO communication smallsat (Astranis), reliability of individual flying vehicle (Armada E), etc.

Dr. Yendler is teaching satellite related courses at different universities and military installations, including but not limited to Purdue University, Morehead University, Tokyo Institute of Technology, Wright-Petersen AirForce base, etc.

Prior to YSPM, Dr. Yendler has worked as a thermal engineer at Lockheed Martin Corp. (LM) for almost 20 years.  Dr. Yendler worked successfully on different commercial and government programs. Prior to Lockheed Martin, Dr. Yendler held post –doctoral position at NASA Ames, participating in developing methods of growing plants in space station ”Mir”.

Register

Please Note: This event is being conducted entirely online. All attendees will connect and attend from their computer, one connection per purchase. For details please see our FAQ

Event Standard RateAttendees
Introduction to Thermal Vacuum Testing and Vacuum Science in the Aerospace Industry - (single connection)US $ 1195.00
Pack of 5 connectionsUS $ 4,780.00
Pack of 10 ConnectionsUS $ 8,365.00
Pack of 20 ConnectionsUS $ 14,340.00
For volume discounts call +1.303.770.8800 for quote
* all other discounts do not apply to license packs

By registering I indicate I agree with LRA Institute's privacy policy and understand I may receive emailed reports, articles, event invitations and other information related to products and services from LRA Institute and any of our business partners. I understand I may unsubscribe at any time by clicking the link included in emails.

Cancellation Policy

Your registration may be transferred to a member of your organization up to 24 hours in advance of the event. Cancellations must be received on or before December 18, 2020 in order to be refunded and will be subject to a US $195.00 processing fee per registrant. No refunds will be made after this date. Cancellations received after this date will create a credit of the tuition (less processing fee) good toward any other LRA Institute event. This credit will be good for six months from the cancellation date. In the event of non-attendance, all registration fees will be forfeited. In case of conference cancellation, EUCIs liability is limited to refund of the event registration fee only. For more information regarding administrative policies, such as complaints and refunds, please contact our offices at 303-770-8800

Missing Attachment